www.mobil-ora.hu

 
 

 

CODE-lock operation The central makes possible to open the magnetic lock with a code on the keyboard, consisting of four numbers. First the number of the flat is to be indicated after push the button-KEY-,after this the code, composed by 4 numbers. Each flat has an opening code,these are programmed by the manufacturer at random,the figures are shown in the code-register enclosed. Instructions for programming Each central has an individual reset-code consisting of figures.This code can be changed and rechanged. For the rechange, the central power cut is necessary,afterwards the jumper on the panel must get voltage by short circuit.After this,the jumper is to be interrupted.

Entering into the programm: 000 <key> master code <key>
display : P- .

Programming of central :

 0   Changing of the flat

    0 <key>flat number <kulcs> new code <key>

 1   Changing of the master :

    1 <key> new code  <key>

 2    Timing the magnet lock:

    2 <key> new time  <key> 0-255 sec

 3    max. ringing time:

    3 <key> new time  <key> 0-255 sec

 4    max. communication time:

    4  <key> new time  <key> 0-255 sec

 5    The max.number of the flat for the code lock for the control of:

    5 <key> new flat number   <key>

 6    The adjust of the backsignal sound of the electric lock:

    6 <key> new time  <key>

 7   The adjust of the backsignal sound of electric lock:

    7 <key> new time  <key>

 8   The adjust of the sound of the keyboard:

    8 <key> new time  <key>

 9    The opening of the lock by code:

    9 <key>

14     Lakásszám amelytől a központ működik:

    14 <key> flat number  <key>

15   Lakásszám ameddig a központ működik:

    15 <key> flat number   <key>

90    Kártya felprogramozása:

    90 <key> flat number  <key>kártya közelítése<key>

91   Kártya törlése:

    91 <key> flat number  <2×key>

    Programmode off ( DEL )

CODEfon-Solar Ltd. H-1095 Budapest, Soroksari street 110.
Map

- Top -